Brack-14 is a structural support kit for floating shower seats, suspended shelving/furniture, and more. The Brack-14 modular design can be configured to accommodate structures with longer spans. Combine kits as necessary [recommend 1 kit per 16″ span – will vary by project].
Kit contains two brackets and two sets of screws. Additional 2 3/4″ screws required if combining kits are not included.
100% Manufactured in Canada
Brack-14 is a structural support kit for floating shower seats, suspended shelving/furniture, and more. The Brack-14 modular design can be configured to accommodate structures with longer spans. Combine kits as necessary [recommend 1 kit per 16″ span – will vary by project].
Kit contains two brackets and two sets of screws. Additional 2 3/4″ screws required if combining kits are not included.
100% Manufactured in Canada
| Size | 14" |
|---|
At what point are these brackets installed in the build process?
Brackets must be mounted at the rough-in stage. You must have access to the studs inside the framed wall to properly mount.
What is this used for?
The Brack-14 is a structural support for any application where there is an engineered suspended structure. (ie. floating shower seat, shelves, vanity, etc.)
Can I use foam board in between the brackets?
No – foam board is not structurally sound. You must use a structurally sound material (ie. 3/4″ plywood, aluminum honeycomb, solid wood, etc.)
For shower application, can I tile directly on top of the engineered seat?
No – you absolutely must waterproof prior to tiling.
Can I fasten the brackets on a 2×2 stud?
No – a minimum 2×4 stud in required. 2×6, 2×8, studs are also compatible.
Can I fasten the brackets to metal stud?
No – wood studs only.
1067 Wellington Rd Unit A101B, London, ON N6E 2H5
